,

How To Making Trommel Machine For Amalgamation

Trommel Machine for Amalgamation Processing

The process of amalgamation or the processing of gold from rock using trommel machines are gold processing techniques the simplest and cheapest, and is typically used by small-scale miners. In the processing of gold rock using a trommel machine, most tools needed for processing is a trommel machine that functions as crusher and trap of gold ore from gold rock material as well as the tool is made of a steel drum. Many some people who do not know the form and the workings of this trommel machine. For this trommel machine we can make their own in a simple way.

HOW TO MAKING MACHINE TROMMEL FOR AMALGAMATION


Cut a metal pipe steel drum thickness of at least 5 mm and thicker iron will be nice, due to for the resilience of the trommel machine, and lifespan can be durable for processing. Because the function of this drum machine for grinding rock, and the longer it is used the thickness of metal trommel machines would dwindling

For trommel machine length of approximately 75 cm and a diameter of between 28 cm middle, but if you want to customize a place can be made with their own desires, but most importantly the size should not be too large, so that the processing results will be maximized.

Simple Trommel Machine

Then after the cut, cover the holes either side of the drum machine with iron plate, lest there was a hole, as shown above, and provide an iron in the middle of the circle, which functions as a player of trommel machines.

TO INSERT PLACE A MATRIAL

To insert place a matrial rock, holes in parts of the drum next to the left or right side and not in the middle of the drum. For holes can be made in a square or round, and remember the rest of the pieces later re-used as cover. And later on the cover, seal with the same iron on top, as shown below

                       Picture from above                                                       Images from the side



Image cover Trommel machine

Remember the cover must correspond to the hole  trommel  machine, Because this trommel machine should be impermeable to water

If all the drum is mounted, staying put in a buffer iron. As the picture below, and remember the installation of the Trommel machine must not be tilted to the right or to the left, so it should be a straight horizontal.


For iron in the rock crusher is used as axles made of material that is large and consists of two pairs of large and small iron, or it could be two large and one small, for the length of the iron in the drum, leaving 10 cm of the length of the tube drum, Because this metal can later be inserted and removed from the drum machine and not a patent in the drum. 



This video is simple trommel machine for the processing of mineral rock gold with system amalgamation


Top Ad 728x90